• WAP手机版 RSS订阅 加入收藏  设为首页
其它论文

激光测距仪控制软件设计[信息]

时间:2015-04-01 22:05:19   作者:   来源:   阅读:3179   评论:0

附件下载:

内容简介:

 摘 要

本设计主要针对高温铝液距离测量,由于温度以及精度的限制,选取DLS-A 30激光测距仪完成距离的测量。
针对DLS-A30激光测距仪无显示界面这一特点,采用软件控制的方法,通过C++ Builder平台上c++语言的程序编写,完成软件的设计。然后应用串行通信原理,将DLS-A 30激光测距仪与PC机连接,通过PC机上软件平台进行控制。
通过操作与调试,在PC机上显示距离与温度,该设计方案可行。
关键词激光测距,控制软件,C++语言, C++ Builder平台
The software control for laser range finder
Abstract
This design is mainly aimed at the high temperature liquid aluminum distance measurement range finder. Due to the restrictions of temperature and precision, DLS - A 30 laser rangefinder should be selected to complete distance measurement.
Because of the laser range finder for the DLS-A30 has no display screen ,we use the software control method.The design firstly introduces the characteristics and principles of DLS - A 30 laser rangefinders, and the development and necessity of the control software. Then combined with knowledge learnt, software design is accomplished by selecting build c + + platform and programming c + + language. Lastly, through the application of the serial communication principle, distance measurement and display will be completed by connecting DLS - A 30 .
Through the operation and commissioning, the pc display the data of distance and the tempreture, so the design is feasible.
Keywords: laser ranging, software control, c + + program language, c + +  Builder

标签:激光测距仪 控制软件 软件设计 
相关评论

免责申明:本网站旨在相互学习交流,是一个完全免费的网站,部分原创作品,欢迎转载,部分内容来自互联网,如果侵犯了您的权利请尽快通知我们。

Copyright 2008-2018 机械制图网 站长信箱:279459762@qq.com

湘ICP备17005312号